debug capture data physical start

The command starts capturing files.

Syntax

debug capture data physical start

Default

By default, capture is inactive.

Note:

■

Once this command is issued, recording is performed to an in-memory buffer.

■

If the buffer becomes full, recording stops.

Command Mode

Enable

Related Commands

NA

Examples

The following example performs a network capture of both LAN and ADSL.

# debug capture data physical start 
Note: Debug capture data will be collected locally, and later 
sent to a PC via TFTP/FTP. Please make sure that 
VLAN 1 is defined and the PC is accessible through it.